Compared to other tint films and sprays, FlyEyesKit is incredibly easy to apply and remove. The unique dotted pattern design ensures a bubble-free result, and the material will stretch and conform to virtually any surface. Our product will not affect your beam pattern or colour and only negligibly affects brightness. It is durable enough to last for years, and provides a quality gloss finish.

This product when used as recommended is completely legal on UK roads. Very light colours such as white are not recommended for rear lights or indicators, as daylight can obscure the appearance of light coming from behind the material. This effect is not noticable with other colours, and our darker kits provide an unobstructed view of brakes and indicators in any external light conditions.

If you are unsure about a particular colour, please contact us and we will be happy to provide a recommendation for your vehicle.

Yes, the film will not fade or start to peel off in any way. We've tested our product with powerful jet washes, and even these can't lift the film from the lamp.

We provide our kit like this so you have plenty of margin to grab and pull the material around your lamps. Films sold at the exact shape of lamps don't give you any room for error. Don't cut the film too finely yourself, as you will need plenty of area to grab and pull the material around the contours of your light fixtures. Make any shapes you cut at least 5 or more centimetres too big so that you can push the material around the edges of your lights and trim off any excess in-situ.

FlyEyesKit film has a unique removable adhesive which lasts for up to 5 years after application. Removing FlyEyesKit takes seconds and will not leave any glue residue behind on your light casing. If you suspect your vehicle's light casings have been previously sprayed with a clear lacquer to protect against UV rays or stone chips, or if you have applied other tinting sprays, do not apply the film to your lights as the removal may cause damage to your existing lacquered finish.

If you are applying over your main beam lights, ensure that either the bulb has a silvered tip, or that the fixture has a cowling in front of the bulb. Most UK headlamps are fitted like this. Our kit can withstand some quite harsh punishment, but the radiated heat from direct exposure to some high-power, bare-bulb headlamps can go above tolerance levels. We offer full refunds to anybody who has bought this product and found it unsuitable for their lamps. For more information on this or any other issue, please email us or use our contact form to get in touch.

Yes we do. If you have a large or unusual order, please contact us via our contact page or send email to info@flyeyeskit.co.uk and we'll get back to you.

We have 44 different colours available, with a list available here under the colours section of the site.

FlyEyesKit can withstand year-round weather. Snow, ice, freezing temperatures or brilliant sunshine, our material will continue to look great on your lamps year after year.

FlyEyesKit is available in 15x15cm increments from 30x30cm all the way up to 45x150cm.

Yes, and you can find out here.

No. We use PayPal as our payment gateway, but you can pay either by paypal account or credit/debit card in the checkout section.